8/31/2012

Glasser Braided Carbon Fiber 4/4 Cello Bow with Silver Mounting Review

Glasser Braided Carbon Fiber 4/4 Cello Bow with Silver Mounting
Average Reviews:

(More customer reviews)
Greetings. To those interested in this bow but confused about the list price the accurate list price for a silver mounted braided Glasser bow is $850. $480 is the list price for the nickel mounted bows.
Thanks. Rozanna

Click Here to see more reviews about: Glasser Braided Carbon Fiber 4/4 Cello Bow with Silver Mounting



Buy Now

Click here for more information about Glasser Braided Carbon Fiber 4/4 Cello Bow with Silver Mounting

Read More...

Cecilio CVA-500 Handmade Ebony Fitted Viola Outfit - 15 Inches Review

Cecilio CVA-500 Handmade Ebony Fitted Viola Outfit - 15 Inches
Average Reviews:

(More customer reviews)
I thought this was a great buy. I'm a beginner violist and needed a cheap viola to learn on. It was tough tuning the strings at first but if you put resin or peg drops on the peg holes it becomes easier. It's pretty light because the wood isn't that thick. It does the job though. Can't beat the price either!

Click Here to see more reviews about: Cecilio CVA-500 Handmade Ebony Fitted Viola Outfit - 15 Inches



Buy NowGet 60% OFF

Click here for more information about Cecilio CVA-500 Handmade Ebony Fitted Viola Outfit - 15 Inches

Read More...

8/30/2012

Artino SP-3 Resonance End Pin Stopper for Cello Review

Artino SP-3 Resonance End Pin Stopper for Cello
Average Reviews:

(More customer reviews)
I got this End Pin Stopper after my teacher suggested it. Whether or not it actually resonates the sound, I don't know, nor can I hear a profound difference. The grip on the bottom is almost rubbery and sticks extremely well to any floor. I do have one problem with it. The indent where you put your end pin on isn't deep enough. If you have a rubber tip on your end pin, then it may slip out a lot. This isn't a problem when you're sitting up straight and playing, but if you lean back and tilt your cello closer to the ground, the end pin will slip off the rock stop the majority of the time. This isn't a problem if you're not using a rubber stopper and instead your thin, metal tip. There is actually a small hole (not shown in the picture) in the middle of the end pin indention that your bare end pin will fit very nicely in. Keep in mind the rest of the end pin stopper is easily scratched by the metal of your end pin.

Click Here to see more reviews about: Artino SP-3 Resonance End Pin Stopper for Cello



Buy NowGet 36% OFF

Click here for more information about Artino SP-3 Resonance End Pin Stopper for Cello

Read More...

Glasser X Series Carbon Graphite Black 4/4 Cello Bow with White Hair Review

Glasser X Series Carbon Graphite Black 4/4 Cello Bow with White Hair
Average Reviews:

(More customer reviews)
I requested this item as a gift because it was affordable. The bow is, of course, important to the sound and I have to say that even though this bow is inexpensive, as an upgrade from my standard issue student fiberglass cheap bow it is 20x the sound quality for 1.5x the price.
Handles nicely, and is probably pretty tough ( I play with a lot of rock bands so this is handy when traveling )
If you are broke but care about your sound, try it fo sho.

Click Here to see more reviews about: Glasser X Series Carbon Graphite Black 4/4 Cello Bow with White Hair



Buy NowGet 16% OFF

Click here for more information about Glasser X Series Carbon Graphite Black 4/4 Cello Bow with White Hair

Read More...

8/29/2012

Xeros Anchor Endpin Rest for Cello Review

Xeros Anchor Endpin Rest for Cello
Average Reviews:

(More customer reviews)
I love this xeros anchor endpin rest for cello because of these reasons:
*it helps me to correct my cello position;
*I can always adjust the endpin rest length to get to the correct cello position;
*I don't have to worry about the endpin slipping out of its position while playing cello. That's specially true when the floor of stages is carpeted;
*it forces me to use 4-legged chairs, which most of the times do not have cushions; and
*it looks heavy duty.
Thank you for having this product available!

Click Here to see more reviews about: Xeros Anchor Endpin Rest for Cello



Buy NowGet 37% OFF

Click here for more information about Xeros Anchor Endpin Rest for Cello

Read More...

Kun Original Viola Shoulder Rest Review

Kun Original Viola Shoulder Rest
Average Reviews:

(More customer reviews)
Kun shoulder rests are contoured to the shoulder, and, in my opinion, are the best in the business.

Click Here to see more reviews about: Kun Original Viola Shoulder Rest



Buy NowGet 53% OFF

Click here for more information about Kun Original Viola Shoulder Rest

Read More...

8/28/2012

Pirastro Cello Rosin Review

Pirastro Cello Rosin
Average Reviews:

(More customer reviews)
I bought this for my son who plays the cello, so that I could reclaim my Pirastro violin rosin. I have used this brand for at least 30 years, still have the original cake, and will never switch.

Click Here to see more reviews about: Pirastro Cello Rosin



Buy NowGet 47% OFF

Click here for more information about Pirastro Cello Rosin

Read More...

Sonuus G2M Universal Guitar To MIDI Converter Review

Sonuus G2M Universal Guitar To MIDI Converter
Average Reviews:

(More customer reviews)
If you're an instrumentalist who wants to convert your sound into midi(enabling you to trigger electronic sounds) this might be your ticket to ride. I purchased this unit to trigger sounds from my electric guitars. I have old unit by roland(VP-10) which was designed to track vocals. It did not work well on vocals, but was good on guitars. Well this unit is cheaper and tracks better too. The Roland does double duty of processing, but it is no longer made. All one has to do to get it working is put in a battery, plug a guitar cord in, plug a midi out cable in, plug midi cable into midi input, and run an out cable from unit into you guitar effects/amp / mixer channel/recording channel. This is a device created by a company with affiliates in guitar tuner technology. So tracking was their priority. It is mono, so playing power chords is out.I like playing solo lead lines on one string. If you change from one string to the next,remember to mute the note before hitting the next, otherwise it goes gonzo. If you have midi gear and want a device that will accept any guitar you own without having to install a pickup on it, then this could be for you. If you need to play chords, buy a roland system. Like the VP 70 ,this unit gives one the freedom to just plug in and play. I recently connected the sonuus to a MOPHO synth. That unit is monophonic, so the marraige seemed fruitful. Not all of the sounds of the MOPHO were guitar friendly. Tweaking patches/sounds on your slave unit will be essential to get good interplay between your instrument and the unit you choose to trigger. While I use it on guitar,any instrument can trigger this. If you have a violin, acoustic guitar,sax, mandolin, harp, ect. and If it has small mic output or a contact pickup on it, it can interface with the Sonuus. Just make sure that you have an adaptor to bring your connection to a 1/4 input. I would think wind instruments with a small bell mike could work well with this, as they are monophonic. For those craving a wider palette of sound, check it out. AMEN


Click Here to see more reviews about: Sonuus G2M Universal Guitar To MIDI Converter



Buy NowGet 25% OFF

Click here for more information about Sonuus G2M Universal Guitar To MIDI Converter

Read More...

8/27/2012

NS Design CR4 Viola Review

NS Design CR4 Viola
Average Reviews:

(More customer reviews)
NS Design CR4 Violin and CR4 Viola
I had been reluctant to buy such an expensive electric violin... in a world where for the same money one could get a stellar first rate premium signature edition electric guitar. Yes, the Electric Violin market is a smaller market, but still the hesitation over price seemed entirely reasonable. When the WAV 4 Chinese NS Design models came out at bargain prices, I jumped and bought one and was largely happy with it (see my Amazon Reviews of the WAV 4 and the Fender FV3 vs the NS Design WAV4).
I heard of people stringing violins for viola tuning (CGDA instead of GDAE) and was fascinated with the idea. I ordered a C string and strung it on the end of my FV3 and ran the other strings over a slot, leaving the E string off when I got to the end. I loved the viola tuning, but couldn't find a C string that sounded quite right with the other strings. Then it occurred to me that perhaps the best way to achieve viola tuning is with a real viola.
Now, if one thought that the market for Electric Violins was small, well, the market for Violas is even more constricted. I kept returning to the NS Design, and because the CR Series describes so well in their own promotional literature, and because the On Line Reviews were so favorable, I decided to order an NS Design CR4... after a few drinks, of course.
Amazon often resorts to The Electric Violin Shop for some of these items, and so I went directly to their site. I remembered that months ago I had inquired about ordering a Bridge Electric Violin from their store and was annoyed that my particular island out on the High Seas was not included on their address drop down list... making the order impossible to conduct as per usual. I complained in their Contact Us Box and then quickly forgot about getting the Bridge Violin anyway... the pretty colored ones were all sold out, leaving only the ugly colors available, and not at reduced pricing either... full price for the ugliest things you would ever not hope to see. Anyway, you wouldn't believe what happened! These wonderful people took my harsh suggestions to heart and fixed the addressing problem. When I went to order the NS Design CR4 Viola, there it was, my Island was on the drop down list... which was when I remembered how hard I had been on them (remember I had had a few drinks). Of course, with my order, I included a heart felt apology as well as expressions of my deepest gratitude for appreciating my business and preparing for it.
With orders of that price, the ordinary mails of the United States can not be trusted... it seems that the Ordinary Mail Service can hire thieves to work at much lower rates than honest men and women, and at the end of the day the Ordinary Postal Service doesn't need to worry about delivering quite so much as they would if their low wage employees didn't pick through it all at first. So The Electric Violin Shop uses premium shippers, adding almost $200 to the Order, but my CR4 arrived almost the same day, except that Thanksgiving Day intervened. The Sales Lady had included a nice little hand written note thanking me for my business and wishing me luck. I think I will be a return customer to that particular Electric Violin Shop.
I had read a CR4 Review before which spoke of an NS Design Violin arriving in tune. Well, so did mine. Plugged into my existing Electric Violin settings and sound systems, I was playing in a manner of minutes.
Oh, if you read my older Reviews, you will find that I have had problems supporting the heavier electric violins, that is, just holding them up in a position to play, and they tend to slip slide around a lot. Its all rather distracting and takes a great deal away from the Music. So I did take about 20 minutes to fashion a Violin Choker, patent pending (see my other reviews on the WAV and the Fender FV3), out of a key ring, and key ring clip, and some cotton cloths line rope and cotton string. I clip it through the NS Design Shoulder Rest bracket and it holds the Viola very closely under my chin. The Viola remains so steady, I don't even need to use the chin rest.
The volume knob on the CR4 works well... on some instruments the resistance of the volume potentiometer seems ill selected, as not much actual volume range is covered using the instruments volume knob, and one has to make all of the big volume changes at the amplifier and processor stages.
There are two tuner controls. The first should be labeled "BETTER" and the second one labeled "WORSE"... the first does away with that harsh electric sound, and the second one heaps more of it on. Anyway, the CR4 can probably be dialed in pretty close to whatever it is you are looking for, even before outputting to whatever processors and effects units are awaiting down-line.
Fit and finish is really superb. I knew that the NS Design CR4 had active electronics and so must have had a battery, but did not immediately see where the battery access panel was, or even how to get into the string bay, as I had done with the WAV 4. But eventually the little retainer bracket moveable tab attracted my attention, and when I moved the tab off to the side, the battery and string bay cover fell right off. You know, the entire back panel and battery string cover had fit so well together, I had thought it had been one entire piece. I had actually been set to take a screwdriver to the whole thing.
The wood, body and finger board are excellent and attractive. You know, I confess to using olive oil on my fingers to speed up my fingering and make modulating the strings easier, and this is the first time ever that a new violin has not turned my finger inky black. That means that after their last staining of the fingerboard they had actually taken the time to do a fine sandpapering of the fingerboard... it was so nice and smooth. Usually I have to do that kind of fine detailing myself, but they had done it for me. Thank God, for a change.
Oh, and the strings seem fine. Usually one has to toss that the strings that come with these things, But NS Design used what sound like premium steel chrome wound strings.
I had complained of the WAV4 being stiff and inflexible... not giving much of a sense for player `feel', but the CR4, at least the Viola (I haven't played the CR4 Violin but imagine it is quite similar in all regards), seemed to have flexibility... that when using some strength and force in modulating the strings, the violin actually bends in a bit... a great perception of playability and control... a rewarding `feel' to the instrument. One has to wonder how they did it... apparently the CR4's are not the same thick blocks of wood that the WAV models are.
Now a word on Violas in general. I had heard it said that Violas, being larger, are therefore slower. Well, my Fender FV3 Violin measures from the nut to the bridge for a string length of 12 7/8 inches, while my Viola measures 14 1/4. That is not much of a difference... just ten percent. But it does seem to give me more Tonal Resolution, that is, it's easier to land on exactly the right note sweet spots, so to speak, even if one has to move a bit further to reach them. And when one rolls one's fingers to modulate notes, one can get in a much more vigorous wiggle without worrying so much about over-modulating. Anyway, after having played both Viola and Violin, and not to sound condescending, but the Viola seems more fit for men, while the violin seems better suited for the smaller hands of boys and girls.
Oh, and as far as trading the Violin's high E String for the Viola's low C String ( violins are tuned to GDAE while violas are tuned down to CGDA ), while occasionally the lilting and ethereal E string has its valued uses, particularly when clustered together with other violins in concert, still in most cases that really piercing high string is used only because it is there, and the results are shrill and often clash with the other instrumentation. Bands are often afraid of including an Electric Violin, and only because they fear those wildly high E Strings stabbing into their brains by way of the ears. The Viola, however, with that C String on the low end, can reach some real bassy lows, and one can still finger far enough down on the high end A string to suggest the musical mood and intensity of Going High without actually going so high as to be positively annoying. My feeling is that if Violas became better known, they would certainly become more popular, and would largely replace the violin everywhere but in concert venue.


Click Here to see more reviews about: NS Design CR4 Viola



Buy NowGet 20% OFF

Click here for more information about NS Design CR4 Viola

Read More...

Travelite TL-50 Fretted Case for Dreadnaught Guitar Review

Travelite TL-50 Fretted Case for Dreadnaught Guitar
Average Reviews:

(More customer reviews)
My original violin case was from the 1980's. It weighed a ton. I ordered this to replace it and was really surprised by how light it is. My kids have stood on it (bad kids) and it has held up. Very nice.

Click Here to see more reviews about: Travelite TL-50 Fretted Case for Dreadnaught Guitar



Buy NowGet 46% OFF

Click here for more information about Travelite TL-50 Fretted Case for Dreadnaught Guitar

Read More...

8/26/2012

Fishman G-II Acoustic Instrument Preamp Review

Fishman G-II Acoustic Instrument Preamp
Average Reviews:

(More customer reviews)
The perfect location for the transducer of my instrument yields low volume. Therefore I need a preamp that will boost the signal to match the loudness of my other instruments. This preamp didn't make much difference even when the input pot (on the back of the unit) was all the way to the max. If the job of this device is to merely match impedance, then maybe it's doing its job. I don't know. But if the job of this device is to boost the signal of the transducer, then it should offer a max volume setting that is too loud and we could choose a setting in between that suits us best. But at best it gives a slightly noticeable increase in volume.
This is not a strong amplifier. It is merely a 2-band EQ with a slight loudness increase. It did not do the job for me, so I am giving it the minimum rating.

Click Here to see more reviews about: Fishman G-II Acoustic Instrument Preamp



Buy NowGet 38% OFF

Click here for more information about Fishman G-II Acoustic Instrument Preamp

Read More...

"Wristies" Hand Warming Practice Gloves - Short Length for Large Hands: Black Review

Wristies Hand Warming Practice Gloves - Short Length for Large Hands: Black
Average Reviews:

(More customer reviews)
There are two types of Wristies--regular and heated (which have a pocket that holds a heat packet). The description of this product as being "hand warming" led me to believe this was the "heated" type. It is NOT...and the company does not offer the heated type. The company was clearly not trying to mislead, but somebody who knew there were two types of Wristies might be confused, as I was.

Click Here to see more reviews about: "Wristies" Hand Warming Practice Gloves - Short Length for Large Hands: Black



Buy Now

Click here for more information about "Wristies" Hand Warming Practice Gloves - Short Length for Large Hands: Black

Read More...

8/25/2012

The Original Hill Peg Compound Review

The Original Hill Peg Compound
Average Reviews:

(More customer reviews)
Ok,so I'm no luthier...
But I didn't find this stuff to be all that helpful. So if you are an part-time ameteur trying to make the pegs on that cheap violin you bought out curiosity (yep, I bought it too)stop slipping, this won't help you much. I may try drying it out a bit like the first entry said, but I'm not taking my $50 violin to a luthier :).

Click Here to see more reviews about: The Original Hill Peg Compound



Buy Now

Click here for more information about The Original Hill Peg Compound

Read More...

Behringer LX1-X Amplifier/Multi-Effects Processor Review

Behringer  LX1-X Amplifier/Multi-Effects Processor
Average Reviews:

(More customer reviews)
As with all multi-effects, some presets are great...some not. I love the AC30 & the Fender Blackface amp models in this...VERY nice with my Johnson Tele (using a twin-blade humbucker in the bridge position). THe pedal doesn't really work well..at all. But, I didn't buy it for the pedal...and there's a jack for plugging in an external (quality) pedal if you think you might use this live.
I paid about $70 for this. Would I buy it again? Probably so. I'd certainly shop around, but...for what you get for the money it was hard to beat. I also like the programming flexibility. Some say it can be difficult, yet I've had other Behringer Vamp series and once you learn it...you'll be fine. So far...I haven't found a need to mod anything except flanger/phaser timings. Not a bad device...just don't put faith in the pedal.

Click Here to see more reviews about: Behringer LX1-X Amplifier/Multi-Effects Processor



Buy NowGet 50% OFF

Click here for more information about Behringer LX1-X Amplifier/Multi-Effects Processor

Read More...

8/24/2012

Rubber Endpin Tip for Cello Review

Rubber Endpin Tip for Cello
Average Reviews:

(More customer reviews)
I paid 4x what the item was worth to have it shipped. It works great and protects my floor, but I'd have been better off getting one at the music store and paying half the amount of shipping in gas.

Click Here to see more reviews about: Rubber Endpin Tip for Cello



Buy NowGet 50% OFF

Click here for more information about Rubber Endpin Tip for Cello

Read More...

Wittner 7/8 - 4/4 Cello Ultra Composite Tailpiece with 4-tuners and Nylon Tailgut Review

Wittner 7/8 - 4/4 Cello Ultra Composite Tailpiece with 4-tuners and Nylon Tailgut
Average Reviews:

(More customer reviews)
I just purchased a used Franz Hoffman Maestro Cello out of Ann Arbor Michigan. That cello came with this very tailpiece. It works very well. After receiving an ebony tailpiece out of a Tulsa Strings Store with the heavy metal Wittner individual fine tuners, I made my decision not to use that one based on the composite comparison in hand.
I have a second cello, an Eastman Strings 200 Series Cello which requires setup. This cello will receive the same tailpiece and was actually recommended by the luthier in Tulsa after I'd purchased the ebony. I love honesty but I'd also like to hear from others. I'm curious why anyone would pay 51 dollars for a Wittner Aluminum tailpiece when this one is available for 23 dollars?

Click Here to see more reviews about: Wittner 7/8 - 4/4 Cello Ultra Composite Tailpiece with 4-tuners and Nylon Tailgut



Buy NowGet 19% OFF

Click here for more information about Wittner 7/8 - 4/4 Cello Ultra Composite Tailpiece with 4-tuners and Nylon Tailgut

Read More...

8/23/2012

Peterson VS-F StroboFlip Virtual Strobe Tuner Review

Peterson VS-F StroboFlip Virtual Strobe Tuner
Average Reviews:

(More customer reviews)
This is a great tuner. I wouldn't buy it to use on stage or in any playing situation, but doing intonation work as a guitar tech it works flawlessly. I run the Guitar Repair Institute and this little device is standard issue for every student that walks through our door.

Click Here to see more reviews about: Peterson VS-F StroboFlip Virtual Strobe Tuner



Buy NowGet 42% OFF

Click here for more information about Peterson VS-F StroboFlip Virtual Strobe Tuner

Read More...